Frequency Response Analyzer by AMREL: Frequency Response Analyzer Features & Benefits
 
QUESTIONS? CONTACT US 
         
 
  FRA Product
  FREQUENCY RESPONSE ANALYZER (FRA) FEATURES AND BENEFITS
   
Digital Sine Correlation to Remove Harmonics for Accurate Measurements
Programmable Integration (Sampling) Time will Allow Measurement of Micro-ohm
Signals Buried Under Noise Without the Need for Auxiliary Equipment
Simultaneous V/I Measurement to Ensure Exact Impedance and Phase Information
DDS Sine-wave Generation, Yielding Frequency Errors Less than 0.02Hz
Floating Dual Independent Signal Analyzers Provide Single-channel Impedance Measurements or Both Channels
to Measure Transfer Functions, Transconductance,Impedance, Signal Analysis (FRA) Data and Other Important
Parameters in Polar/Rectangular Format
User-friendly Features Include: Auto-gain, Quick-set ac Amplitude, Signal Overload (Signal Saturation) Protection,
and Adjustable Sample Interval Without the Complicated Calculations - the Above Features Allow the User to Start
Measuring Impedance Without Hassles.
Auto-Gain Control and Flexible Ranges for Measuring Small Signals in Noisy Environments with 1μV
Sensitivity while Maximizing Resolution and Precision to Obtain an Accurate Measurement
Universal ac + dc Output Signals Critical for Impedance Measurement/AC Modulation Applications
in the Battery/Fuel Cell/Electronic Components and Devices R&D, Testing and Production Sectors
GPIB/RS-232 and Optional USB/Ethernet Provide State-of-the-art Connectivity while Satisfying Diverse
Throughput/Network Security Requirements
System-level Multi-channel Impedance Measurement can be Achieved Using the Integrated
MCU-1 Capability and a Switch Matrix
Impedance Measurement Application Program Included to Save Costs Associated with
Existing Expensive Impedance Measurement Software
Comprehensive Application Program with Premium Features - Nyquist, Bode, V/I, Real-time Display of
Impedance Measurements and Operating Conditions, Frequency Sweeps with Adjustable Amplitude
in Log/Linear Form and Auto-save for Logged Data to Establish AMREL’s FRA as the Ultimate Diagnostic Tool
• 0.1Hz Models Available
FOR MORE INFORMATION OR TO ASK A QUESTION

Complete AMREL's request information form

Call toll free (800) 654-9838 U.S only or (626) 443-6818 Intl. Monday-Friday 8am-5pm (PST) to speak with an AMREL representative.

Visit AMREL’s ePower FAQs or eLoad FAQs for commonly asked product questions.

 
 
 
 
 
AMREL MANUFACTURES THE WIDEST RANGE OF ELECTRONIC TEST EQUIPMENT ON THE MARKET INCLUDING:
 
eLoad dc Electronic Loads
PLA Series of Air-cooled Programmable dc Electronic Loads
600w to 250kW
PLW Water-cooled Programmable dc Electronic Loads
3kW to 250kW+
Programmable dc 
Electronic Loads System Solutions
BPL Bench-top Programmable dc 
Electronic Loads
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 300W
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 600W
ZVL Zero-volt Programmable dc Electronic Loads
60W to 300W
ZVL Zero-volt Programmable dc Electronic Loads
ZVL Zero-volt Programmable dc Electronic Loads
200W to 1.5kW
ePower dc Power Supplies
SPD Dual-channel Programmable dc Switch Mode Power Supplies
300W to 360W

1.2kW
SPS Programmable dc Switch Mode Power Supplies
1.6kW

30kW to 900kW+
FRA Frequency Response Analyzer
100W to 200W
FRA Frequency Response Analyzer
15W to 2kW
MC-1 RS-485 Multi-channel Controller  
      MCU Ethernet Multi-channel Controller
up to 200W per Channel
Copyright © 2009 AMREL All Rights Reserved 3445 Fletcher Avenue El Monte, CA 91731 Phone 626-443-6818 Fax 626-443-8600