Multi-channel Master Network Controller by AMREL: Multi-channel Master Network Controller Featuers & Benefitd
 
QUESTIONS? CONTACT US 
         
 
  MCU Product
  MC-E AND MC-R MULTI-CHANNEL MASTER NETWORK CONTROLLERS FEATURES:
   

MC-E and MC-R MULTI-CHANNEL MASTER NETWORK CONTROLLERS FEATURES AND BENEFITS

MC-E (Ethernet)Multi-channel Master Network Controller
AMREL’s MC-E Multi-channel Controller provides complete remote access and control of AMREL’s eLoad programmable dc electronic loads and ePower programmable dc power supplies. The MC-E reduces your vulnerability to security breaches by reducing the number of entry points down to one. Still, it enables the control of virtually unlimited programmable power devices via a closed-loop wired or wireless Ethernet network. 

MC (RS-485) Multi-channel Master Network Controller
The MC-R Multi-channel Controller connects via a RS-485 interface, providing the ultimate solution for controlling up to 31 channels using a single PC interface connection.  Choose from RS-232, GPIB or Ethernet to connect the MC-R to your PC. Use the RS-485 to control, monitor, auto-sequence, synchronize and output sequence multiple ePower supply and eLoad electronic load channels.

MC-E Ethernet Controller and MC-R RS-485 Controller Features and Benefits include:
• Uses a single PC connection to control virtually unlimited ePower or eLoad products using the MC-E Ethernet Controller
• Uses a single PC connection to control up to 31 channels using the MC RS-485 Controller
• The only controllers with the functionality to provide advanced system management
• Locally access and program devices at a distributed site, without returning to the central monitoring and
control center via wireless connectivity via the MC-E Controller
• Provides network security features that not only support TCP/IP but also a proprietary UDP (User Datagram Protocol)
for higher throughput. via the MC-E Controller
• Control, synchronize, trigger and output sequence multiple ePower or eLoad units while using one single
IP Address or PC Connection via the MC-E Controller
• MC-E and MC Controllers provide GPIB, USB, RS-232 or Optional Ethernet/USB Interface Connectivity
to the Computer via One Single Connection.
• Access Up to Eight Ethernet Devices - Expandable to Access Unlimited Devices, via Additional MC-E Controllers
• Expandable up to 31 channels via the MC Controller

FOR MORE INFORMATION OR TO ASK A QUESTION

Complete AMREL's request information form

Call toll free (800) 654-9838 U.S only or (626) 443-6818 Intl. Monday-Friday 8am-5pm (PST) to speak with an AMREL representative.

Visit AMREL’s ePower FAQs or eLoad FAQs for commonly asked product questions.

 
 
 
 
 
AMREL MANUFACTURES THE WIDEST RANGE OF ELECTRONIC TEST EQUIPMENT ON THE MARKET INCLUDING:
 
eLoad dc Electronic Loads
PLA Series of Air-cooled Programmable dc Electronic Loads
600w to 250kW
PLW Water-cooled Programmable dc Electronic Loads
3kW to 250kW+
Programmable dc 
Electronic Loads System Solutions
BPL Bench-top Programmable dc 
Electronic Loads
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 300W
FEL/PEL Low-voltage Programmable dc Electronic Loads
60W to 600W
ZVL Zero-volt Programmable dc Electronic Loads
60W to 300W
ZVL Zero-volt Programmable dc Electronic Loads
ZVL Zero-volt Programmable dc Electronic Loads
200W to 1.5kW
ePower dc Power Supplies
SPD Dual-channel Programmable dc Switch Mode Power Supplies
300W to 360W

1.2kW
SPS Programmable dc Switch Mode Power Supplies
1.6kW

30kW to 900kW+
FRA Frequency Response Analyzer
100W to 200W
FRA Frequency Response Analyzer
15W to 2kW
MC-1 RS-485 Multi-channel Controller  
      MCU Ethernet Multi-channel Controller
up to 200W per Channel
Copyright © 2009 AMREL All Rights Reserved 3445 Fletcher Avenue El Monte, CA 91731 Phone 626-443-6818 Fax 626-443-8600